Outdoor Kit for Pro Hotspot Indoor (With Antenna)
ClodPi’s Pro Hotspot – Outdoor Accessories Kit:
ClodPi is happy to announce the “Outdoor Accessories Kit” compatible to our Pro Hotspot (Indoor) device. Get ready to deploy your Indoor Hotspot in open to sky mode with easy to install steps.
Package Contents
ClodPi’s Outdoor accessories kit compatible for its Pro Hotspot (Indoor) device is provided comes with the following items:
SN | ITEM | QUANTITY |
1 | Enclosure (IP67, fiberglass reinforced polyester material) | One |
2 | Breathers | Two |
3 | PoE Injector 802.3at (48V, industry grade) | One |
4 | PoE Splitter 802.3at | One |
5 | Antenna (3.5dbi, Fiberglass) | One |
6 | Surge Arrester | One |
7 | RJ45 Connector (IP67) | One |
8 | SMA to N Connector | One |
9 | Base Plate (Mild Steel) – to mount Pro Hotspot (Indoor) inside the enclosure | One |
10 | Flagpole Mounting Kit - Bracket | One |
11 | Flagpole Mounting Kit - Clamps | Two |
12 | Weatherproof Tape | One |
13 | Insulation Tape | One |
14 | Screws (M3) | Two |
15 | Screws (M4) | Seven |
Prerequisite: You will need to purchase separately
RJ45 Ethernet (cat5e or cat6) stp cable in order to connect your internet router with your Hotspot outdoor setup. The length of the cable will depend on the distance between your internet router and the outdoor enclosure where it is being deployed.
Copper wire in order to connect surge arrester with the earthing / grounding mechanism to protect the hotspot from a lightning strike.
Mounting Flagpole of non-rusting material having diameter between 1.5 to 2 inches. Length of the flagpole is your choice to get a clear line of sight for your Hotspot.
Clamps and nails to securely install the mounting flagpole on your terrace, roof or any other identified location.
Screwdriver with ability to screw slotted and cross head (Philips) screws.